53
code HC0100.00GB ed.A-1509
HY
AQUAPUMP HYBRID
HYBRID HEATER
7.3. Menu structure
Level 0 (
U
) = always visible
Level 1 (
M
) = visible if maintenance operator password (
H80
)
or manufacturer password has been entered
Level 2 (
C
) = visible if manufacturer password has been entered
Level 3 (
A
)= visible through Modbus only
7.4. Analogue input menu
By accessing with maintenance operator password to "tP"
analogue input menu, at level 1 of machine on-board control
menu, it is possible to read the values of probes present on
the heat pump:
•
t01: inlet water temperature (°C)*
•
t02: outlet water temperature (°C)*
•
t03: compressor intake temperature (°C)
•
t04: compressor drain temperature (°C)
•
t05: high pressure (bar)
•
t06: low pressure (bar)
•
t07: external air temperature (°C)**
(*) values corresponding to "HP Return Temp." and "HP Delivery Temp."
read by SMARTWEB/EASY in Operation Monitoring menu (see par. 4.4)
(**) value different from "External Temp." read by SMARTWEB/EASY
in Operation Monitoring menu (see par. 4.4)
7.5.
Display
Standard viewing displays water outlet temperature from plate
exchanger of the heat pump (therefore before being post-heated
by the boiler if the latter is operating) in tenths of a degree Celsius
or the alarm code if at least one is activated.
If several alarms are activated, the first one is displayed, while
the second one will be displayed once the first one has been
reset. In menu mode, viewing depends on the current position.
7.6. Signalling LEDs
Compres-
sor
LED
•
ON if the compressor is on
•
OFF if the compressor is off
•
FLASHING if timings for compressor
start wait are in progress
Domestic
water
LED
•
ON if domestic mode is enabled
•
OFF if domestic mode is disabled
•
FLASHING if domestic water pro-
duction is in progress (domestic
water valve enabled)
Defrost
LED
•
ON if defrosting is enabled
•
OFF if defrosting is disabled or
finished
•
FLASHING if defrost interval time
count is in progress
Antifreeze
resistance
LED
•
LED ON if antifreeze resistance is
enabled.
Pump LED •
NOT USED
Alarm
LED
•
LED ON if an alarm is on.
H e a t i n g
mode
LED
•
LED ON if the unit is in heating mode.
C o o l i n g
mode
LED
•
LED ON if the unit is in cooling mode.
Содержание Aermax Series
