Apcon ACI-3144-XR, Руководство пользователя

Страница: 69 / 90

A54-3144-XR • Rev B 69 APCON, Inc.
ACI-3144-XR Chassis User Manual Chapter 6. Maintain the chassis
Blades
You can install a variety of blades in the ACI-3144-XR I
NTELLA
F
LEX
XR chassis. For a list of
blades supported chassis, see page 26 .
The slots for the blades are labeled alphabetically ( A to B ) on the right side of the chassis,
starting with A in the lowest slot.
For more information about how blades and ports are labeled, see Port numbering on
page 28.
♦ To remove a blade:
1. Use
W
EB
XR
or CLI to power off the blade before removing it. You do not have to power
off the entire chassis.
a. In
W
EB
XR, click the soft arrow in the lower-right corner of the blade.
b. From the pop-up menu that is displayed, select Turn blade power off.
2. On either side of the blade, turn the thumbscrews counter-clockwise to loosen them.
3. Holding the blade straight, pull it out of the chassis straight towards you.
ESD CAUTION
To avoid damage to hardware from ElectroStatic Discharge (ESD),
do not touch devices without first taking appropriate precautions
(see
Protect sensitive equipment on page 32 for details).
CAUTION
Do not twist or lift up the blade as you insert it into the chassis. That action
could damage components.