Apcon ACI-3144-XR, Руководство пользователя, Страница: 26 / 90

APCON, Inc. 26 A54-3144-XR • Rev B
Chapter 3. Specifications and compatibility ACI-3144-XR Chassis User Manual
Compatibility
The following section describes the compatible blades and transceivers for an
I
NTELLA
F
LEX
XR chassis.
Blades supported
The following I
NTELLA
F
LEX
blades are supported for use in an I
NTELLA
F
LEX
XR chassis
running current software. These blades support multiple data rates and protocols. With
these blades you can make one-to-one, one-to-many, many-to-one, and many-to-many
connections.
If any of the blades are part of your existing inventory and you want to install them in an
I
NTELLA
F
LEX
XR chassis, first verify that the blades meet the recommended blade revision,
listed in the following table:
Blade Part Number Description
Current
Revision
ACI-3030-T05-1
Bypass Switch TAP
Aggregator Blade with 5 segments (each with 2 network ports
and 2 ports to connect to other appliances), plus
4 each 1G/10G I
NTELLA
F
LEX
ports
R2
ACI-3030-E32-7 Blade with 32-ports (24 each 1G/10G ports and
8 each 40G ports) of standard I
NTELLA
F
LEX
features.
R8
ACI-3030-E36-6 Blade with 36-ports (36 each 1G/10G ports) of
standard I
NTELLA
F
LEX
features.
R9
ACI-3032-E36-1
Multi-Function Blade with 36-ports (36 each 1G/10G ports).
Features both standard I
NTELLA
F
LEX
and
Multi-Function features (packet capture, packet
slicing, packet deduplication, and protocol stripping).
R13
ACI-3033-S14-1
I
NTELLA
S
TORE
II
Blade with 12 each 1G/10G, 2 each 40G ports.
Features both standard I
NTELLA
F
LEX
and
Multi-Function features (packet capture, packet
slicing, packet deduplication, and protocol stripping).
Also includes 2 internal Channel Ports for data
capture.
R10
NOTE
If earlier revisions of blades are installed in the chassis, then on occasion some
errors in rebooting may be observed. The workaround is to again reboot.