Apcon ACI-3144-XR, Руководство пользователя

Страница: 49 / 90

A54-3144-XR • Rev B 49 APCON, Inc.
ACI-3144-XR Chassis User Manual Chapter 5. Configure the chassis
1. On the IPv4 Menu , press DOWN repeatedly until the LAN1 Netmask menu is selected,
and then press ENTER . The following screen is displayed:
2. To set the desired netmask, use the CANCEL and ENTER buttons to position the cursor
over the first digit you want to change.
• To move the cursor to the right, press
ENTER .
• To move the cursor to the left, press CANCEL .
3. When the cursor is positioned over a digit you want to change, press either UP or
DOWN repeatedly to increase or decrease the value.
4. When the desired digit is displayed, press ENTER to confirm the setting and move the
cursor to the right over the next digit.
5. Repeat the steps above until the desired netmask is displayed.
6. When the desired netmask is displayed, press ENTER repeatedly until the cursor
moves all the way to the right and the IPv4 Menu is redisplayed.
7. To save the netmask, press DOWN repeatedly until the Save Changes menu option is
marked on IPv4 Menu , and then press ENTER .
The chassis verifies the netmask and displays one of the following icons:
Configuration > LANn IPv4 gateway
The following example sets the LAN1 IPv4 gateway on the chassis.
1. On the IPv4 Menu , press DOWN repeatedly until the LAN1 Gateway menu is selected,
and then press ENTER . The following screen is displayed:
The IP address is valid.
The IP address is not valid.