AP&T AP-YV3303, Руководство пользователя

Страница: 10 / 14

Instructions
On-line mode
The plane of the electrostatic detection window of the sensor should be parallel to the surface of the object to be measured, and the detection
distance(the standard detection distance specified above: 5mm, 10mm, 25mm, 50mm, 100mm, 150mm, 200mm, 250mm, 300mm, 350mm, 400mm,
450mm, 500mm, 550mm, 600mm, 700mm) and detection gear should be selected according to the amount of static electricity carried by the charged
object and the use environment during using; the detection data displayed by the terminal is the most accurate at this point.
On-line mode: (Monitoring terminal, integrated power supply and communication software must be purchased separately. Please refer to the
instruction manual of system monitoring terminal and system integrated power supply for comprehensive on-line mode )
These three network ports of the 24V power adapter, the monitoring terminal, and the electrostatic sensor are both power ports and communication
ports which can be used in common.
Connection to monitoring terminal
Connection to PC
IMS Smart Controller
WAN/LAN P4 P3 P2 P1 POWER
P1-P4 : 1/2-VCC 3-RS485_B 4-RS485_A 5/6-GND 7-C_V TH /HV AL 8-C_ACT/Clean 9-PE(Metal shield)
Red-V
TH
/HV
AL
ACT/Clean-Green ACT Wrok/Link
NEXT
SCAN
NEXT
LINK
SET
SCROLL
Connect to AC
power supply
Cable
Cable
Handheld terminal
Network adapter
Electrostatic sensor
SW1
Red-V TH /HV AL ACT/Clean- Green
SW2 SW4 SW3 SW5S W6 SW10 SW8 SW9 SW7 SW11 SW13 SW12 SW14 SW15 SW16
P1
P17 P18
P2 P4
P20 P19
P7 P8 P6 P5
P23 P24 P22 P21 P30 P32 P27 P28 P26
P9 P10 P12 P11 P15 P16 P14
V/A Display
IMS Power Supply
PC
Electrostatic sensor Electrostatic sensor Electrostatic sensor
communication converter
Integrated power supply
Cable
Cable
Operation and precautions...
to