Precautions
：
•
Please read the operating instruction carefully before using the device in order to use it correctly.
•
Please check the specifications of the power supply before powering on the product. Any power supply that does not meet the specifications may
cause damage or even failure to the product.
•
Please operate at the specified ambient temperature (0 to 50°C).
•
Keep a distance of more than 1m between the people and the product to avoid the impact of human static electricity on the test during the test.
Testers must wear electrostatic clothes, electrostatic caps and electrostatic shoes.
•
The insertion depth of the φ5 diameter stainless steel mounting rod must not exceed the position of the detection switch on the back of the sensor.
•
The surface of the φ5 diameter stainless steel mounting rod must not have insulating coating.
•
Do not touch the electrostatic detection head during detection.
•
Make sure that the sensor window is free from particulates and dust pollution.
•
There should be no obstruction between the sensor and the detected object, otherwise the accuracy of the detection result will be affected.
•
There should be no electrical equipment that affects the sensor within the detection distance of the sensor. Otherwise, the internal equipment and
chip may be failed or damaged.
•
The plane of the sensor detection window should be parallel to the surface of the object to be measured to measure charged objects accurately.
•
5 seconds of power connection before use. Otherwise, sometimes the data display will be unstable.
•
The measured value is smaller than the actual electrostatic value of the charged object when the charged object is smaller than the calibration plate.
•
The measured value is larger than the actual electrostatic value of the charged object when the charged object is larger than the calibration plate.
•
Do not adjust zero in the state of static charge or during electrostatic measurement(non-electrostatic calibration process). The displayed static value
may be zero if zero is set during static testing.
•
Do not install the sensor around high-voltage equipment, such as high-voltage power supplies, electrostatic generators, ion generators, and
eliminators. High voltages will affect the performance and detection accuracy of the sensor.
•
Tighten the sensor when installing a high-vibration area; otherwise, data errors may occur.
•
Please check the power cable or communication cable of the product regularly and replace it immediately if it is damaged. Otherwise it will easily
cause problems such as leakage of electricity, poor communication, and abnormal work.
•
It may cause failure when the product suffers from mechanical shocks such as drops, bumps, etc..
•
The whole equipment must be reliably grounded during use; Otherwise, it is easy to cause abnormal or even damage.
•
Do not use the equipment in inflammable and explosive environment.
•
Do not touch the electrostatic detection window with sharp objects.
•
The product is strictly prohibited to touch liquid during use, otherwise there will be abnormal, resulting in electric shock or fire.
•
Exceeding the detection range may result in product failure.
•
Power must be turned off during inspecting or replacing the product, otherwise it may cause electric shock or fire.
•
Do not disassemble the detector which is a precision equipment.
•
It is strictly forbidden to disassemble products without authorization. Internal maintenance and repair must be carried out by professional personnel.
•
The product is specially designed for detecting static electricity on the surface of objects and is strictly prohibited for other purposes. Any abnormal
use may machine failure, electric shock, fire and other hidden dangers.
•
Installation and use precautions
Sensor Accessories List
Part name
Standard
or optional Part No.
Specification
Picture
Application
Black shielded network
cable with crystal
connectors at both ends
(with bag)
Standard
8WXI00004
Super five double shielded
network cable
Used to connect product power
supply data interaction
Power Adapter
Standard
AP2930003
Input voltage: AC100-240V
Output voltage: DC24V
Output current: 2A
Output power: 48W
Used for product power supply
data interaction
National standard
power cord
Standard
8YXG25110
Standard 1.8m
，
Optional 3m/5m
Used to connect adapters
Black shielded network
cable with single-ended
crystal head -2.5m (with
bag)
Optional
8WXI00002
Super five double shielded
single-ended network cable
Used to connect to PLC/machine/
large slitting machine, etc.
Mounting brackets
Standard
AP8038012
40*39*2 waist hole diameter
5mm, round hole diameter 3.5
Used to fix electrostatic sensors
Infrared remote control
Standard
AP2253002
AP&T Three-in-one panel
L*W*H=85.76*39.76*6.66
Used to adjust electrostatic sensors
Blower
Bar
Sensor
CAL
S
RZ
V
TH
+
V
TH
-
K
-
K+
I
B
-
I
B
+
T+
T
-
F
R/S
B
R/S
F
Q
+
F
Q
-
I
B
+
I
B
-
F
S
+
F
S
-
RES
Warning
：
