35
TC5-1V10SA rev.06
TC5-1V10SA
2
Activating Minimum Speed Curve
If you have just finished specifying the points on the curve:
n
Press the push-button once again. The word
OFF
flashes on the
display.
n
Turn the adjustment knob clockwise by one notch. The word
ON
flashes on the display indicating that the minimum speed curve is
now activated.
If you have previously specified the points on the curve:
n
Set the selection knob to
STAGE 1 — MINIMUM SPEED / CURVE
.
The current minimum speed flashes on the display.
n
Press the push-button to display the points of the curve currently
defined until the word
OFF
appears (fourteen clicks).
n
Turn the adjustment knob clockwise by one notch. The word
ON
flashes on the display indicating that the minimum speed curve is
now activated.
ii) All six points of the curve must be specified. If you do not need six
different points, repeat your last minimum speed for each unneces-
sary point of the curve.
iii) Certain restrictions apply to reduce the risk of errors:
•
decreasing minimum speeds are not allowed.
•
the minimum speed variation cannot exceed 10% per day.
Содержание TC5-1V10SA
Страница 1: ...TC5 1V10SA EnvironmentControl USER SMANUAL M 890 00167 rev 06 REV 01...
Страница 6: ...6 TC5 1V10SA rev 06 LOCATION OF THE CONTROLS...
Страница 59: ...NOTES NOTES...
