20
TC5-1V10SA rev.06
TC5-1V10SA
1
Specifying the Curve
n
Set the selection knob to
SET
POINT / T
o
CURVE
. The cur-
rent temperature set point
flashes on the display. If the
temperature curve is currently
activated, the set point alternates
with the word "On".
n
Press the push-button. The word
OFF
is displayed indicating that the
termperature curve is deactivated. If this is not the case, see below
to deactivate the curve.
Repeat the following steps for each of the six points:
n
Press the push-button once again. The day number is displayed,
alternating with the word "
day
".
n
Using the adjustment knob, set the day number to the desired value.
n
Press the push-button once again. The current temperature set point
is displayed, alternating with the word "
set
".
n
Using the adjustment knob, adjust the set point to the desired value.
Once the six points of the curve have been specified, activate the curve as
explained below.
NOTE
: Make sure the temperature curve is deactivated before specify-
ing new points (see below).
Содержание TC5-1V10SA
Страница 1: ...TC5 1V10SA EnvironmentControl USER SMANUAL M 890 00167 rev 06 REV 01...
Страница 6: ...6 TC5 1V10SA rev 06 LOCATION OF THE CONTROLS...
Страница 59: ...NOTES NOTES...
