11
TC5-1V10SA rev.06
TC5-1V10SA
Switches are used to activate or deactivate the additional probes connected
to the controller.
n
Activate each additional probe by setting
the appropriate switch to
ON
:
• Switch # 3 activates the probe connected to input # 2.
• Switch # 4 activates the probe connected to input # 3.
• Switch # 5 activates the probe connected to input # 4.
2
Extending the Probes
Each probe can be extended up to 500 feet (150 meters). To extend a probe:
n
Use a shielded cable of outside diameter between 0.245 and 0.260 in
(6.22 and 6.60 mm) (the cable dimensions should not be under 18
AWG) to ensure the cable entry is liquid tight. Do not ground the
shielding.
n
It is preferable to solder the cable joint to ensure a proper contact
between the two cables.
CAUTION:
Do not run probe cables next to other power cables. When
crossing over other cables, cross at 90°.
3
4
5
ON
Содержание TC5-1V10SA
Страница 1: ...TC5 1V10SA EnvironmentControl USER SMANUAL M 890 00167 rev 06 REV 01...
Страница 6: ...6 TC5 1V10SA rev 06 LOCATION OF THE CONTROLS...
Страница 59: ...NOTES NOTES...
