aoyue INT 2703A+, Инструкция по эксплуатации

Страница: 11 / 32

11
OPERATING GUIDELINES
B. HOT AIR GUN
1. Follow the initial procedures above, “A. INITIAL
PROCEDURES”.
2. Activate “Hot Air Gun” switch (“19” from the control panel).
3. The system will immediately start to blow air at an airflow rate of
50 while rapidly and safely increasing the air temperature to
100°C (default system operating parameters). These values will
be reflected from the Hot Air Gun Air Temperature and Air
Pressure display panels, “18” and “16” from the control panel,
respectively. The metal ball inside the air gauge (“1” from the
control panel) will also settle somewhere in the middle of the
visible area indicating that the system is blowing air at an average
or normal rate.
4. Adjust the air flow level using the AIR PRESSURE ADJUSTMENT
BUTTONS (“3” from the control panel).
5. Adjust the hot air gun air temperature using the HOT AIR GUN
TEMPERATURE ADJUSTMENT BUTTONS (“2” from the control panel).
The prefix of the display for Hot Air Gun Temperature will change
from “C” to “c” indicating that air temperature is being adjusted. It
will return to “C” indicating actual temperature is displayed.