aoyue INT 2703A+, Инструкция по эксплуатации

Страница: 14 / 32

14
OPERATING GUIDELINES
D. SOLDERING IRON
1. Connect the Soldering Iron connection assembly to the 6-pin
receptacle located at the front of the control panel (“8” from the
CONTROL PANEL GUIDE).
2. Follow the initial procedures (“A. INITIAL PROCEDURES”).
3. Connect the vacuum tube to the Smoke Absorber Terminal or
Vacuum Cap (“7” from the control panel). If smoke absorber
function is to be used.
4. Activate the “SOLDER IRON” Activation switch (“14” from control
panel). This will automatically start to increase the temperature of
the soldering iron to 350°C (default).
5. Adjust the soldering iron temperature using the SOLDERING IRON
TEMPERATURE ADJUSTMENT buttons (“4” from the control panel).
6. If smoke absorber function is to be used. Activate the “SMOKE
ABSORBER” Activation switch (“15” from the control panel).
NOTES:
1. Hot Air Gun Temperature is adjustable between 100° and 480°C .
2. Hot Air Gun Airflow Rate is adjustable between 15 and 100.
3. The hot air gun is equipped with a temperature limiting feature to
only allow a temperature rise of 3 degrees per second. This is in
accordance with the industry standard allowable temperature rise
time to prevent damage to sensitive components.
Upon the start of the automated reworking function the hot air gun
would slowly heat up until it reaches the set temperature of segment A.
After the set temperature is reached it would maintain the set tempera-
ture for the duration as set in segment A. The displayed duration will
start counting down until the timer reaches 0 after which it will proceed
to the next segment, repeating the process until it finishes all 5 seg-
ments. Upon the end of the fifth segment the cool down function will be
activated to automatically cool down the system before shutting off.