ISDN Router Manual V.1.1
54
AT$CIn
Enable inner communication
0
*1
•
disable inner communication
•
enable
AT$CPn
Receiver priority setting
This function only available when
set AT$CG2
*1
2
3
•
ring TEL-A/B alternatively
•
ring TEL-A 10 times first
•
ring TEL-B 10 times first
AT$CSn
Select supplementary service function
AT$CZn
Initialize charge
AT$CZn =MM-DD-YY
1
2
3
•
initialize TEL-A to zero charge
•
initialize TEL-B to zero charge
•
initialize data port to zero charge
AT$CFn
Call forwarding function select
Select call forwarding by local or
Network.
*1
2
3
4
5
•
local call forwarding
•
network forwarding, ID=32
•
network forwarding, ID=33
•
network forwarding, ID=34
•
network forwarding, ID=35
AT*CFAn
Enable call forwarding for analog port A
*0
1
•
no forwarding
•
if the incoming call is for TEL-A,it
will forward automatically to the
phone number defined by
AT*CFA=xxxxxx
AT *CFBn
Enable call forwarding for analog port B
*0
1
•
no forwarding
•
if the incoming call is for TEL-B, it
will forward automatically to the
phone number defined by
AT*CFB=xxxxxx
AT*CFGn
Enable call forwarding under global call
*0
1
•
no forwarding
•
if the incoming call is a global call it
will forward automatically to the
phone number defined by
AT*CFG=xxxxxx
AT*CFA=x
Set call forwarding number for analog
port A
x
•
x=forward phone number
AT*CFB=x
Set call forwarding number for analog
port B
x
•
x=forward phone number
AT*CFG=x
Set call forwarding number for global
call
x
•
x=forward phone number
AT*Ln
A-law or u-law coding select
*0
1
•
A-law coding
For European, China, Australian and
etc
•
U-law coding
For American, Japan and etc
AT*W0=n
Set the dialing interpretation of ‘#’
*0
1
2
•
‘#’ is interpreted as a normal digit
•
‘#’ is interpreted as a sub-address
delimiter
•
‘#’ is interpreted as an ending digit.
In enbloc sending mode TA will
send the dialing
number after
received the ending digit or after
timeout
