ISDN Router Manual V.1.1
45
5.14 Setup LAN-to-LAN Connection
To setup a LAN-to-LAN connection you need to have the following information before you can
do it.
•
Remote router ISDN telephone numbers
•
Remote router logon
user ID
and
password
•
Remote router ISDN
IP pool
and
ISDN IP address
must be configured before dialing in can
take place. You can usually decide on an arbitrary IP address and IP pool for the purpose of
doing LAN-to-LAN connection. For example using
192.168.1.1
for IP address and
192.168.1.2-
for IP pool would be an acceptable choice.
With the above information can begin to configure your remote and local router for LAN-to-
LAN connection.
Configure Remote Router for LAN-to-LAN Connection
If the remote router is also the same model of router then follow the following steps:
1.
Setting up you account for dialing in
> config int isdn ppp add user <user id> pass <password>
2.
Configure IP address
> config int isdn ip address 192.168.1.1 255.255.255.0
3.
Configure IP pool
> config int isdn ip pool 192.168.1.2
That's it, you are done with configuring the remote router. In the case that the remote router
is not the same model then you should consult the router's documentation in order to do
similar configuration for LAN-to-LAN connection.
Configure Local Router for LAN-to-LAN connection:
Assuming that the local router is the current router, the following steps are used to configure
the router:
