Anzzi SD-FRLS05901 Series, Инструкция по установке и эксплуатации

Страница: 4 / 26

ATTENTION
.
Threshold must be level for proper installation.
The installation of this unit requires that you drill down into the threshold. Contact
the manufacturer of the base, or threshold material with any questions regarding the
drilling of holes into their product.
This model requires a minimum 2-3/4"(70mm) of flat level threshold space for
installation.4-1/8"(105mm) of flat level threshold space is better.
.
.
Tools Required
Philips
Screwdriver Level Tape
measure Drill O1/8''
(3mm)
Drill bit O1/4''
(6mm)
Drill bit
100%
Silicone
Sealant Pencil Pubber
mallet Safety
Glass Hack
saw Metal file
Tin snips Stud finder Knife
2
INSTALLATION GUIDE
BEFORE YOU BEGIN
This product is heavy
and may require two
people to install.
.
Use cut-resistant,
non-slip gloves to
reduce the risk of
personal injury and
hold the glass firmly.
.