INSTALLATION
GUIDE
BEFORE YOU BEGIN
.
Please check the product for transit damage, missing parts immediately. Damage
reported later cannot be accepted. Please handle the product with care. Avoiding any
impact on all sides and edges of the glass.
Consult your local plumbing codes prior to installation.
To reduce the risk of breakage, keep corner protectors on glass while installing.
If this unit is going to be installed in a new construction, please install all of the
required plumbing and drainage before installing the shower. Use a competent and
licensed (if required by local code) plumber for all plumbing installation.
Please make sure that prior to beginning the installation, the surfaces are leveled
and solid and will be able to support the total weight of the unit. Also make sure the walls
are at right angles. Irregular installation surface level, radius corners or improper angle
of side walls will result in serious problems for your installation. Please note that some
adjustments and drilling might be necessary during the installation process.
Please protect all primary surfaces of the product during installation. Never set your
glass down directly onto a tile floor. Leave corner protectors in place until necessary
to remove them. Always use a piece of wood or cardboard to protect the bottom edge
and corners of the glass prior to and during installation.
This unit must be installed upon a finished threshold and against finished walls.
Special care should be taken to avoid hidden pipes or electrical cables when drilling
holes on walls .
This product is heavy and may require two people to install.
When cutting or drilling metal components or when handling glass, to reduce the risk
of personal injury, protective eye wear, gloves, and closed-toe shoes are required.
Failure to install this product according to installation instructions may result in
personal injury, property damage, or product failure, and may void the warranty.
WARNING
.
.
.
.
.
.
.
.
.
.
1
Содержание SD-FRLS05901 Series
Страница 26: ......
