Anzzi SD-FRLS05901 Series, Инструкция по установке и эксплуатации

Страница: 24 / 26

Step 18
1. Disassemble gaskets by removing handle levers and handle knobs(Fig 23.1).
2. Door Panel[08A] installation: Install handles and two washers on the outer side of
Door Panel[08A] . Install gaskets and handle lever and handle knob on inner side of
Door Panel[08A] . Turn inner handle lever and handle knob to secure. (Fig 23.2)
3. Door Panel[08B] installation: Install handles and two washers on the inner side of
Door Panel[08B] . Install gaskets and handle lever and handle knob on outer side of
Door Panel[08B] .Turn inner handle lever and handle knob to secure. (Fig 23.2)
IMPORTANT: Ensure handle gaskets and washers are placed on each side of glass.
Step 19
1. Apply a good quality Silicone Sealant on the
walls and threshold along the bottom profile and
wall profiles(Fig 24).
Hours
24
22
2
Allen Key
(2mm)
1
Fig23
washer
gasket
handle lever
Allow 24 hours for the silicone to
fully cure before using the shpwer.
Fig24
handle knob