Anzzi SD-FRLS05901 Series, Инструкция по установке и эксплуатации

Страница: 17 / 26

Step 10
Remove Wall Jambs[01] and drill a 1/4"
hole at each location marked for Wall
Jamb[01] (Fig 14).
Step 11
1.Insert Wall Plugs[14] in each hole location.
2.The Wall Plugs[14] should fit securely into the
holes. If needed, a rubber mallet can be used to
insert Wall Plugs.
3.To reduce risk of property damage, the use of
metal hammers is not recommended. If needed,
use drill to slightly enlarge the opening of the hole.
IMPORTANT: Wall Plugs[14] MUST be used.
Wear safety glasses and cut-resistant,
non-slip gloves when drilling or cutting
to avoid risk of injury.
ATTENTION
15
Fig14
Fig15