Anzzi SD-FRLS05901 Series, Инструкция по установке и эксплуатации

Страница: 25 / 26

Care & Maintenance
BASES and BACKWALLS: To ensure long lasting life for your acrylic back walls
(if installed): wipe them off after each use with a soft cloth. To clean the acrylic back walls
use non-abrasive sprays or cream based cleaners. Avoid the use of aerosol spray cleaners.
Never use abrasive cleansers, metal brushes or scrapers that could scratch or dull the
surface.
GLASS: To ensure long lasting life for your glass shower products: wipe them off after
each use with a soft cloth. Rinse and wipe off the glass using either a soft cloth or a
squeegee to prevent soap buildup and water spots (Hard water can etch the surface of
the glass over time if left to dry). To prevent scratching the surface: never use abrasive
cleaners or cleaning products that contain scouring agents. Never use bristle brushes
or abrasive sponges that may scratch the surface.
HARDWARE: To ensure a long lasting finish: wipe off the metal parts after each use with
a soft cloth. Do not use abrasive cleaners or cleaning products containing ammonia, bleach
or acid. If accidentally used, rinse the surface as soon as possible to prevent damage to the
finish (peeling or corrosion). After cleaning the polished finishes, rinse thoroughly and wipe
dry with soft cloth. Clean stainless steel surfaces at least once a week. When applying
stainless steel cleaner or polish to stainless steel hardware, work with (not across) the grain.
Never use an abrasive sponge or cloth, steel wool or wired brush as these may permanently
scratch the surfaces.
NOTE: To maximize the life of your door, it is important to regularly inspect the glass
and all hardware for misalignment, proper attachment, and/or damage.
Contact ANZZI with any questions or concerns
.
23