Step 17
1. Install the
Side Gaskets [05]
to the
Door Panels [08]
(Fig 22.1).
2. If needed, the door height at each wheel can be individually adjusted by using the
wrenches[12]
.
a. For the
Outer Wheels[10]
, using
wrenches[12]
in the package to
carefully loose the nut for half turn. Rotate plastic nut as shown in Fig 22.2. This will raise
or lower the
Door Panel [08A]
at this location so that the door panel can match the wall
better. Fasten the nut again after the adjustment.
b.For the
Inner Wheels[11]
, using the one
wrenche[12]
to hold the nut and using the other
wrenche[12]
to rotate plastic nut as shown in Fig 22.3. This will raise or lower the
Door
Panel [08B]
at this location so that the door can match the wall better. If the nuts loose too
much and can't be tighten again after the adjustment. It will be needed to remove the
Door
Panel [08B]
from the
Support Bar[02]
and fasten the nut by following the Step 14.2
4. Install the
Outer Wheels Cover[10B] and Inner Wheels Cover[11B]
(Fig 22.4 & Fig 22.5).
21
Fig22
[08A]
[05]
4
1
see from the backward
5
see from the backward
2
plastic
nut
nut
3
plastic nut
nut
Содержание SD-FRLS05901 Series
Страница 26: ......