manualshive.com logo in svg

Anybus CompactCom 40 EtherNet/IP, Сетевое руководство

Поделиться
Скачать
Anybus CompactCom 40 EtherNet/IP Скачать руководство пользователя страница 157

   

157

Doc.Id. HMSI-27-212

Anybus CompactCom 40 EtherNet/IP
Doc.Rev. 1.4

Instance Attributes (Instance #1)

Extended

 

# Name

Access Type

Description

1 Safety enabled

Get

BOOL

When TRUE, communication with the safety module is ena-
bled.

Note

: If functional safety is not supported, this attribute must 

be set to FALSE. 

2 Baud Rate

Get

UINT32

Optional attribute

a

. Sets the baud rate for the communication 

between the Anybus CompactCom module and the safety 
module. 
Valid values:

• 625000 (625 kbit/s)
• 1000000 (1000 kbit/s)
• 1020000 (1020 kbit/s)

If not implemented, the default value 1020 kbit/s will be used. 

If other values are set in this attribute the Anybus Compact-
Com module will go into Exception state.

a.

The host application shall never implement this attribute when using the IXXAT Safe T100.

3 IO Configuration

Get

Array of UINT8

Optional attribute. Manufacturer specific settings of the digital 
I/O of the safety module. 

See the manual of the safety module used for information.

4 Cycle  Time

Get

UINT8

Optional attribute

a

. Communication cycle time between the 

Anybus CompactCom and the safety module in milliseconds.

Valid values:

• 2  ms
• 4  ms
• 8  ms
• 16  ms

If another value is set, the CompactCom will enter Exception 
state.

If not implemented, the minimum cycle time for the chosen 
baud rate will be used:

• 2 ms for 1020 kbit/s
• 2 ms for 1000 kbit/s
• 4 ms for 625 kbit/s

The CompactCom validates the cycle time according to the 
minimum values above. If e.g. baud rate is 625 kbit/s and the 
cycle time is set to 2 ms the CompactCom will enter Exception 
state. If the cycle time is set to 8 ms or 16 ms, any baud rate is 
valid.

Содержание CompactCom 40 EtherNet/IP







































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды