manualshive.com logo in svg

Anybus CompactCom 40 EtherNet/IP, Сетевое руководство

Поделиться
Скачать
Anybus CompactCom 40 EtherNet/IP Скачать руководство пользователя страница 153

   

153

Doc.Id. HMSI-27-212

Anybus CompactCom 40 EtherNet/IP
Doc.Rev. 1.5

9.11 CIP Port Configuration Object (0Dh)

Category

Extended

Object Description

This object is used to populate and enumerate the CIP Port Object (see  “Port Object (F4h)” on page 
85) on the network side. Basically, this is a matter of creating and updating instances and attributes which 
shall represent a CIP Port within the host application. This process is necessary in case support for Un-
connected CIP Routing has been enabled (see  “EtherNet/IP Host Object (F8h)” on page 161, Instance 
Attribute #17).

Each instance within this object corresponds to an instance in the CIP Port Object. The object supports 
up to 8 instances, where instance #1 is dedicated to the local TCP port, enabling the host application to 
implement up to 7 additional ports. Instance #1 will automatically be populated with default values, 
however it is possible for the host application to customize instance attributes #2 and #4.

Apart from attribute #7, it is possible to write to the instance attributes only during setup. The host ap-
plication is responsible for keeping instance attribute #7 updated for all ports located within the host 
application.

See also...

•  “Port Object (F4h)” on page 85 (CIP)
•  “EtherNet/IP Host Object (F8h)” on page 161 (Instance Attribute #17)

IMPORTANT:

 

Note that the module does not take over the host application responsibility for error control; the module 

will not verify that the data set by the host application is correct.

Supported Commands

Object:

Get_Attribute
Create
Delete

Instance:

Get_Attribute
Set_Attribute

Содержание CompactCom 40 EtherNet/IP







































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды