9
CHEESE MELTER
P/N 1010983 Rev. F 05/19
®
1
2
OPERATION
Figure 2. Operating Controls
Message
Display
Operating Instructions
1. Turn the power on (Figure 2).
2. Allow the unit to preheat for approximately
20-30 minutes.
NOTE: During preheating, the display flashes
“LOW”. When unit reaches operating tempera-
ture, the display shows “RDY1” or “RDY2” and
the active channel indicator is lit.
WARNING
To avoid injury, be careful when pulling spatula
out from unit. Be sure to allow steam to escape
before putting hands or face over the unit.
Power
Switch
Operating
Buttons
3. Pull out the Spatula and place the product to
be steamed onto the Spatula Trivet.
4. Push the Spatula fully into the unit.
5. Press and release an Operating Button
(Figure 2) to start the steam cycle. Display will
count down to zero.
6. Remove steamed product.
RDY1
