MRT Models
7
Anthony Lifgtates, Inc.
800-482-0003
www.anthonyliftgates.com
1.5 Model Information
The Magnum RailTrac Liftgate provides up to
58 inches of total lift height. The lifting capacity of the
Magnum RailTrac Liftgate ranges from 3500 to 6500
pounds, depending on the model.
The Magnum RailTrac Liftgate works best on truck bodies
with “roll-up” style doors, however it can also be installed
on fl at bed trucks. The standard, bed height (BH), and
gas bottle (GB) models are all installed using the same
method. Gas bottle versions are normally installed on fl at
bed trucks and require the addition of diagonal braces
to connect the rails of the liftgate to the bed of the truck.
These diagonal braces are not part of the kit and must
be provided by the installer. Refer to the installation
instructions for further details.
With the proper tools and two installers, the Magnum
RailTrac Liftgate can be installed in four to fi ve hours (8
to 10 total man-hours).
This Installation, Operation, and Maintenance manual
will provide you with easy to follow instructions, along
with photos and illustrations. We have included a series
of Tips, which will facilitate the installation process. All
Safety precautions have been clearly identifi ed and
detailed throughout each section.
In addition to the installation instructions, a complete
explanation of the safety words and rules are included
in the Safety Section of this manual. Please turn to the
Safety Section and read it thoroughly before proceeding
to the next page.
At the bottom of each page is the Anthony Liftgates Inc.
Product Support phone number. If you are unclear about
any of the instructions, please phone Anthony Liftgates’
Product Support.
All Anthony Magnum RailTrac model liftgates are factory
assembled, tested, and energized to ensure the highest
quality performance standards. The MRT model liftgates
ship completely assembled for fast, clean, and easy
installation.
1.6 Warranty
NOTICE
The liftgate must be installed according to the installation
instructions or the warranty will be void. Unauthorized
modifications of the liftgate may cause it to improperly
operate or cause other unforeseen problems or dangers.
If any deviation is deemed necessary, written permission
must first be obtained from Anthony Liftgates.
All decals must be in place and legible or all warranties
are void.
Before calling for warranty or other product information,
have the serial number, model number, and lift capacity
of your liftgate, which is stamped into the identifi cation
plate on the streetside of the liftgate. Record this
information in the space provided for easy reference
when contacting Anthony Liftgates with questions.
Identifi cation plate.
Serial Number Information
Serial No.
Model No.
Lift Capacity
Date of Installation
Refer to ”10.1 Limited Warranty” on page 49 of this
manual for complete warranty details.
