MRT Models
19
Anthony Lifgtates, Inc.
800-482-0003
www.anthonyliftgates.com
6. Remove the two shipping legs, but do not remove
bottom cross support.
7. Set the liftgate onto the rear sill of the truck body
using the leveling brackets. Do not pinch wires or
hoses when positioning the liftgate against the truck
body.
WARNING
PERSONAL INJURY HAZARD
To prevent personal injury, make sure you use
a lifting device to position the liftgate onto the
rear sill of the truck.
Tip: Two “leveling brackets” are used to position the
liftgate assembly fl ush with the truck body fl oor.
The leveling brackets can be removed after the
installation is complete.
WARNING
CRUSH HAZARD
To prevent personal injury or death, DO NOT
remove the lifting device until the tack welding
is completed.
To avoid personal injury, do not work under the
platform during installation. Work so you are not in
the way if a lifting device, clamps, welds, etc. should
fail.
8. Center the liftgate assembly side-to-side on the rear
of the vehicle by matching the liftgate and truck body
centerline markings. Hold or clamp the columns of
the liftgate securely against the rear frame of the
vehicle using heavy-duty C-clamp(s) on each side.
The columns should now be tight (no gaps) against
the full height of the rear frame of the vehicle.
