Anthem AVM 2, Руководство по эксплуатации

Страница: 47 / 70

6. VOLUMES
a. MAIN ON VOLUME : -40.0 dB
b. MAIN MAX VOLUME : +10.0 dB
c. ZONE2 ON VOL : -40.0 dB
d. ZONE2 MAX VOL : +10.0 dB
e. HPHONE ON VOL : -20.0 dB
f. HPHONE MAX VOL : +10.0 dB
g. VOLUME SPEED : Slow
7. ADVANCED SET-UP
continued …
(menu 5.a) PROCEDURE FOR ‘AUTO’ TEST SEQUENCE:
• Enter the Setup Menu (section 7.1). Go to ‘5. SPEAKER LVL CALIBRATION’ and press SELECT ( ‘Select’ ) .
• Use the
34
keys ( MASTER CONTROL KNOB ) to set TEST SEQUENCE to ‘AUTO’.
• Press the SELECT ( ‘Select’ ) k e y to start the automatic sequence.
• As each speaker plays, use the
34
keys ( MASTER CONTROL KNOB ) to adjust its loudness
relative to other speakers. Once set, the sequence will automatically advance to the next speaker
for adjustment. It will then continue to cycle speaker by speaker to allow you to fine tune all levels.
• Press the EXIT ( ‘ B a c k ’ ) key to stop the automatic sequence.
(menu 5.a) PROCEDURE FOR ‘MANUAL’ TEST SEQUENCE:
• Enter the Setup Menu (section 7.1). Go to ‘5. SPEAKER LVL CALIBRATION’ and press SELECT ( ‘Select’ ) .
• Use the
34
keys ( MASTER CONTROL KNOB ) to set TEST SEQUENCE to ‘MANUAL’.
• Press the
65
( ‘Down’ / ‘Up’ ) keys to go from speaker to speaker.
• As each speaker plays, use the
34
keys ( MASTER CONTROL KNOB ) to adjust its loudness
relative to other speakers.
• Press the EXIT ( ‘ B a c k ’ ) key to stop the manual sequence and set TEST SEQUENCE to ‘OFF’.
7.4.6 VOLUMES
This setup menu allows you to define the power-on volume settings.
(menu 6.a-f) MAIN / ZONE2 / HEADPHONE Volume Settings:
• Power-On Volume: Whenever you turn MAIN or ZONE2 on, all conditions remain the same as when
they were last turned off, except Volumes. This avoids any potential ‘surprises’ of not knowing what
volume someone had set when they last turned MAIN or ZONE2 off, and then having the power-on
volume be either too loud or quiet. You can set independent volumes for MAIN-ON, ZONE2-ON and
HEADPHONE-ON. Then when you turn MAIN on, ZONE2 on, or plug in your headphones, the volume
for each will come on at the known levels you have set.
• Maximum Volume: These settings allow you to individually limit the maximum volume of MAIN,
ZONE2 or HEADPHONE to avoid damaging your equipment and/or your ears. This can also serve as
a Parental Volume Control feature.
• The range of settings available for MAIN is from –95.5 dB to +31.5 dB in steps of .5 dB, and for
ZONE2 and HEADPHONE, the range is from –70.0 dB to +10.0 dB in 1.25dB steps. Remember that the
ON setting can not be set higher than MAX setting.
42