50
7.
ADVANCED SET-UP
continued …
7.4.10 SAVE / RESTORE SETTINGS
The AVM 2 enables you to save the entire setup configuration, except for the time and day. Two separate
save files are provided: SAVE USER SETTINGS and SAVE INSTALLER SETTINGS. If your dealer does the
setup, they can SAVE their setup configuration to their own INSTALLER file. You may also decide to make
further setup adjustments – SAVE those settings separately to your own USER file. FM/AM Tuner presets are
also saved separately in USER SETTINGS and INSTALLER SETTINGS.
Once saved, if someone makes any unwanted changes to the settings of your AVM 2, rather then go through
the entire setup configuration again, you can quickly and easily RESTORE either the dealer’s INSTALLER
settings or your USER settings. FM/AM Tuner presets that were saved in USER SETTINGS or INSTALLER
SETTINGS will also be restored.
The original FACTORY DEFAULTS can also be RELOADED at any time to reset the AVM 2 back to the original
factory settings. Individual speaker level, balance and bass/treble adjustments described in sections 5.6, 5.7,
and 5.9 will be reset to 0 dB. Surround effect settings described in section 5.10 will be reset to ‘None’.
Note
: The first time you plug in the AVM 2’s AC power cord, the factory defaults are automatically
loaded and active.
(menu 10.a, 10.c) Save Settings:
You can Save Settings with or without the use of a Password. Passwords are very easy to set up (see section
7.4.11) and will protect both USER and INSTALLER files from being changed by anyone other than whomever
has the Password.
New SAVES will overwrite the previously saved file
. The AVM 2 will prompt you to confirm
that you want to over-write currently saved settings. Press the
EXIT
(
‘ B a c k ’
)
key at any time to abort a save.
(menu 10.b, 10.d-e) Restore or Reload Settings:
You may RESTORE USER SETTINGS, INSTALLER SETTINGS, or RELOAD FACTORY SETTINGS at will. The
AVM 2 will prompt you to confirm that you want to replace the current settings. Press the
EXIT
(
‘ B a c k ’
)
k e y
at any time to abort a restore.
SAVE / RESTOREExample #1:
‘SAVE USER SETTINGS’.
Note:
FM/AM Tuner presets will also be saved in USER SETTINGS.
• Enter the Setup Menu (section 7.1). Go to ‘10. SAVE/RESTORE SETTINGS’ and press
SELECT
(
‘ S e l e c t ’
)
.
• Upon entering this menu item, “10a. SAVE USER SETTINGS” will be highlighted in red.
• Press
SELECT
(
‘Select’
)
. You will be asked to confirm that you want to over-write current settings.
• Use the
34
keys (
MASTER CONTROL KNOB
) and change to ‘Yes’. If you are using a Password,
you will be asked for it. Use the
1 – 6
keys to enter your Password. The On-Screen display message
will then say ‘Saving Successful’, the Front Panel display says ‘Done!’.
• When finished press
65
(
‘Down’
/
‘Up’
)
to go to another Menu Item, or...
• Press the
EXIT
(
‘ B a c k ’
)
key to leave the submenu and return to the Setup Menu.
10. SAVE/ RESTORE SETTINGS
a. SAVE USER SETTINGS
b. RESTORE USER SETTINGS
c. SAVE INSTALLER SETTINGS
d. RESTORE INSTALLER SET’NS
e. RELOAD FACTORY DEFAULTS
Содержание AVM 2
Страница 68: ...THE BIG PICTURE FRONT PANEL ...
Страница 69: ...THE BIG PICTURE REAR PANEL ...
