Anthem AVM 2, Руководство по эксплуатации

Страница: 40 / 70

1. RENAME SOURCES
a. DISC1 : DISC1
b. DIRECT : DIRECT
c. DISC2 : DISC2
d. TAPE : TAPE
e. TV : TV
f. SAT : SAT
g. VCR : VCR
h. AUX : AUX
2. AUDIO IN FORMAT–MAIN
a. DISC1 : Digital... RCA
b. DIRECT : Anlg Only +0.0 dB
c. DISC2 : Digital... RCA
d. TAPE : Analog... +0.0 dB
e. FM/AM : Analog... +0.0 dB
f. TV: Analog... +0.0 dB
g. SAT : Digital... RCA
h. VCR : Analog... +0.0 dB
i. AUX : Analog... +0.0 dB
35
7. ADVANCED SET-UP
continued …
7.4.1 RENAME SOURCES
ThE Rename Sources Setup Menu lets you change the factory assigned name that is displayed when
selecting a Source. Those that are renamed will then appear that way throughout all Setup Menus and
display screens during normal operation.
Source names can be up to six characters long. You have the following characters available:
• A, B, C….Z, a, b, c….z, < blank >, 0, 1, 2….9.
RENAME SOURCES Example : Rename DISC2 to ‘CD’.
• Enter the Setup Menu (section 7.1). Go to ‘1. RENAME SOURCES’ and press SELECT ( ‘Select’ ) .
• Press the
6
( ‘Down’ ) key until you reach “c. DISC 2 :DISC2”.
• Press SELECT ( ‘Select’ ) . The first character ‘D’ will be highlighted in red.
• Use the
56
keys ( MASTER CONTROL KNOB ) to change characters. Change the first one to ‘C’.
• Press the
4
( ‘Down’ ) key to move to the next character. Change it to ‘D’.
• Use the
34
( ‘Up’ / ‘Down’ ) keys to move to each remaining character. Change to ‘<blank>’.
• When finished press SELECT ( ‘Select’ ) and then
65
( ‘Down’ / ‘ U p ’ ) to go to another Source, or. . .
• Press the EXIT ( ‘ B a c k ’ ) key to leave the submenu and return to the Setup Menu.
7.4.2 AUDIO IN FORMAT–MAIN
The Audio Input Format–MAIN Menu lets you assign a Digital or an Analog input format for each Source.