24
5.
FRONT PANEL
OPERATION
continued …
5.6
VOLUME CONTROL
In
MAIN
the AVM 2 can control the volume of all speakers simultaneously, and the level of individual
speakers or pairs of speakers. ZONE2 and HEADPHONE volumes are also controlled separately.
Note: Always make certain you are in the Zone / Path that you want to adjust before making any
Volume or Level changes.
The LCD display shows the current setting – MAIN, ZONE2, or
HPHONE. To change press MAIN or ZONE2 (Zone / Path), or FRONTS twice (must be in MAIN).
Note:
To adjust the Level / Bass / Treble / Balance of individual speakers or speaker groups, first select
the speaker(s) to adjust, and then rotate the Master Control Knob.
To change MAIN Volume or Level, check to see that the LCD display reads MAIN, then adjust as follows:
•
All Speakers S i m u l t a n e o u s l y:
This is the default position, simply adjust.
•
F ronts Only:
P ress FRONTS, then adjust. This changes Left, Center, and Right speakers simultaneously.
•
Center Only:
P ress CENTER, then adjust.
•
Surrounds Only:
P ress SURROUNDS, then adjust.
•
Subwoofer Only:
Press S U B, then adjust.
Pressing S U B twice
allows you to reduce the level of the
LFE
(Low Frequency Effect) output from a DVD, DTS-CD, or DTS Laser Disk while leaving the bass
derived from the other channels at their original levels. Some of these discs exhibit prodigious
levels of bass, and may need the use of this feature.
• The AVM 2 automatically memorizes the individual
SUB
level settings for each of six different
modes – Dolby Digital, Dolby Pro Logic, DTS, MPEG, Stereo, and DIRECT. This unique feature lets
you adjust the SUB level of a CD (Stereo), to one setting, then play a DVD movie and adjust the
SUB level to a different setting. Play the CD again and the SUB level returns to the previous CD
(Stereo) setting. This eliminates the need to constantly adjust subwoofer level for music vs.
movies. It also allows adjustment for subwoofer level differences in various surround sound
modes.
Note:
When listening in Stereo (CD, FM/AM, etc.) with Front Speakers set to ‘Large’, the Subwoofer
must be set to ‘Super’ for it to receive bass information and function (see section 7.4.3 menu 3.d).
To change ZONE2 Volume:
•
ZONE2:
P ress ZONE2 (Zone / Path), then adjust. Since Z O N E2 has L/R stereo outputs only, the Fro n t s ,
C e n t e r, Surrounds, and Sub buttons do not function.
To change HEADPHONE Volume:
•
H E A D P H O N E:
Check that the LCD display reads MAIN, p ress FRONTS twice, then adjust. If you
prefer, MAIN can be set to mute when headphones are used (see section 7.3.3 menu 3.h).
5.7
BALANCE CONTROL
This allows you to make the L/R speakers louder or quieter than each other.
To change the Balance of:
•
MAIN – Fronts and Sur rounds S i m u l t a n e o u s l y:
Press BAL, then adjust.
•
MAIN – Fronts L/R Only:
P ress FRONTS, press BAL then adjust.
•
MAIN – Surrounds Only:
P ress SURROUNDS, press BAL then adjust.
•
ZONE2:
P ress ZONE2 (Zone / Path), press BAL, then adjust. Since Z O N E2 has L/R stereo outputs only,
F ronts, Center, Surrounds, and Sub do not function.
•
HEADPHONE:
P ress FRONTS twice, press BAL, then adjust.
Содержание AVM 2
Страница 68: ...THE BIG PICTURE FRONT PANEL ...
Страница 69: ...THE BIG PICTURE REAR PANEL ...
