Anthem AVM 2, Руководство по эксплуатации

Страница: 34 / 70

29
6. REMOTE CONTROL OPERATION
continued …
6.2 PATH SELECTION
• MAIN – Press MAIN in Zone/Path/Component, then press .
• ZONE2 – Press ZONE2 in Zone/Path/Component, then press .
• REC – P ress M A I N in Zone/Path/Component, press , then press SSP REC .
Short Cut: After pressing MAIN or ZONE2 in Zone/Path/Component ‘personality’, pressing any other
active key in that selected Path will automatically switch the AVM 2 to that Path.
6.2.1 COPYING THE MAIN SOURCE TO ZONE2 OR REC
Select a MAIN Source first and then for:
• ZONE2 – Press ZONE2 in Zone/Path/Component, then press MAIN Source in SSP Input Sources
near the bottom.
• REC – Press MAIN in Zone/Path/Component, press SSP REC near the bottom, then press
MAIN Source in the SSP Input Sources near the bottom.
Note: The SSP REC key only works when Zone/Path/Component is in MAIN .
Note: While all Analog Sources are simultaneously available to MAIN, ZONE2 and REC, this unique
copy function is the only way to direct a MAIN
Digital Source to ZONE2 or REC.
6.3 SOURCE SELECTION
After selecting the desired Path (MAIN, ZONE2, MAIN+REC), press one of eight SOURCE keys in the SSP
Input Source group near the bottom. To access DIRECT, press DISC1 twice.
6.3.1 SOURCE SEEK (Remote Control Only)
The SOURCE SEEK keys are an easy way to find the active sources. The
7 8
keys go to the previous and
next active source while the
4
key advances one source at a time.
6.4 DIRECT FM/AM STATION ENTRY (Remote Control Only)
When using the FM/AM Tuner, the station frequency can be entered as a four-digit number using the digit
keys. For example, to tune into 98.3 FM, press
SELECT, 0, 9, 8, 3 .
6.5 TIME DISPLAY (Remote Control Only)
To display the time press . The AVM 2 will return to its normal display after a few seconds.
6.6 SLEEP TIMER (Remote Control Only)
If you would like to go sleep while listening to program, the Sleep Timer will automatically turn the AVM 2
power off after a preselected time. So when you find yourself falling asleep at the ‘tube’, take the Remote
Control and:
• Select the desired Zone/Path (MAIN or ZONE2), then press the SLEEP key (which will operate for
that Zone/Path only).