Anrtisu Cell Master MT8212B, Руководство пользователя, Страница: 62 / 294

q
Channel Increment
— Changes the channel increment step size when the
Up/Down arrows are used to select the channel number.
q
Back
¾ Returns to the previous menu.
AMPLITUDE Choosing the AMPLITUDE key causes the soft keys, below, to be displayed
and the corresponding values to be shown in the message area or scale menu de-
pending on the measurement mode.
q
Rel
— Selects whether relative power is on or off. When on, the message
Relative: On
will show in the message area.
q
Offset dB
— Turns offset on or off. When on, a value from 0-60 dB can be
entered.
q
Zero
— Turns zero adjust on or off.
MEAS/DISP Choosing MEAS/DISP causes the soft keys below to be displayed.
q
Running Averages
— Press the
Running Averages
soft key and use the key-
pad to enter the number of averages to use (up to 50)
q
Max Hold
— Displays and holds the maximum responses of the input signal.
q
Limit ON/OFF
— Press the
Limit ON/OFF
soft key to turn on the limits.
q
Lower Limit
— Activate the lower limit line by toggling this soft key. The
unit beeps if the data is below the set limit line and the status is displayed in
the message area.
q
Upper Limit
— Activate the upper limit line by toggling this soft key. The
unit beeps if the data is above the set limit line and the status is displayed in
the message area.
q
Limit Units
— Press the
Limit Units
soft key to select the units.
2-38
Chapter 2 Functions and Operations