Anrtisu Cell Master MT8212B, Руководство пользователя, Страница: 101 / 294

in the standard order. In that case, the Cell Master draws them as a single
bar with no spaces in between.
q
PN Increment
— The PN Increment determines how close together PNs
can be. For instance, if the PN increment is chosen as 4, a measured PN of
9 will be displayed as a PN of 8 with a larger timing error (Tau). PN Incre-
ment is useful in Over The Air testing, where the propagation delay can
shift a PN. Most networks have a PN increment they use to space out the
PNs of their base stations. For conducted measurements, the PN increment
is usually set to 1.
q
Advanced Settings
— Advanced settings include the measurement length
and the external trigger polarity.
q
Meas Speed
— Sets the speed of the measurement. Use the Up/Down
arrow key to select
FAST
,
NORMAL
or
SLOW
. Press ENTER to ac-
cept or ESCAPE to restore the previous value.
q
Ext Trigger Polarity
— The CDMA timing input can use the rising
edge or the falling edge of the ESTM as the zero point in time.
q
Back
— Returns to the previous menu.
MARKER Choosing MARKER in CDMA mode causes the soft keys, below, to be dis-
played and the corresponding values to be shown in the message area. Selected
frequency marker or distance marker locations may be changed using the key-
pad or Up/Down arrow key.
q
M1
— Selects the M1 marker parameter and opens the M1 marker second
level menu.
q
On/Off
— Turns the selected marker on or off.
q
Edit
— Opens the selected marker parameter for data entry. Press ENTER
when data entry is complete or ESCAPE to restore the previous value.
q
Back
— Returns to the Main Markers Menu.
q
M2
through
M4
— Selects the marker parameter and opens the marker second
level menu.
q
On/Off
— Turns the selected marker on or off.
q
Edit
— Opens the selected marker parameter for data entry. Press ENTER
when data entry is complete or ESCAPE to restore the previous value.
q
Back
— Returns to the Main Markers Menu.
q
All Off
— Turns all markers off.
q
More
— Opens the continuation of the Marker Menus.
q
M5
— Selects the M5 marker parameter and opens the M5 second level
menu.
q
On/Off
— Turns the selected marker on or off.
q
Edit
— Opens the selected marker parameter for data entry. Press
ENTER when data entry is complete or ESCAPE to restore the pre-
vious value.
q
Back
— Returns to the Main Markers Menu.
q
M6
— Selects the M6 marker parameter and opens the M6 second level
menu.
q
On/Off
— Turns the selected marker on or off.
Chapter 2 Functions and Operations
2-77