Anrtisu Cell Master MT8212B, Руководство пользователя, Страница: 37 / 294

q
Edit
— Opens the selected marker parameter for data entry. Press
ENTER when data entry is complete or ESCAPE to restore the pre-
vious value.
q
Peak Between M3 & M4
— Places the selected marker at the peak be-
tween marker M3 and marker M4.
q
Valley Between M3 & M4
— Places the selected marker at the valley
between marker M3 and marker M4.
q
Back
— Returns to the Main Markers Menu.
q
All Off
—Turns all markers off
q
Back
— Returns to the Main Markers Menu.
LIMIT Pressing LIMIT in cable and antenna analyzer frequency and distance mode acti-
vates a menu of limit related functions. Use the corresponding soft key to select
the desired limit function. Then use the Up/Down arrow key to change its value,
which is displayed in the message area at the bottom of the status window.
NOTE: Limit is only available in cable and antenna analyzer, interference ana-
lyzer, and spectrum analyzer modes.
Choosing LIMIT in
Freq
or
DTF
measurement modes causes the soft keys below
to be displayed.
q
Single Limit
— Sets a single limit value in dBm. Menu choices are:
q
On/Off
— Turns the single limit function on or off
q
Edit
— Allows entry of the limit amplitude.
q
Back
— Returns to the previous menu.
q
Multiple Limits
— Sets multiple user defined limits, and can be used to create
a limit mask for quick pass/fail measurements.
q
Segment 1 through Segment 5
— Opens the segment menu.
q
On/Off
— Turns the segment on or off.
q
Edit
— Opens the parameter for data entry.
q
Prev Segment
— Edit or view the parameters of the previous seg-
ment.
q
Next Segment
— Edit or view the parameters of the next segment. If
the next segment is off when this button is pressed, the starting point
of the next segment will be set equal to the ending point of the current
segment.
q
Back
— Returns to the previous menu.
q
Back
— Returns to the previous menu.
q
Limit Beep
— Turns the audible limit beep indicator on or off.
Chapter 2 Functions and Operations
2-13