Anrtisu Cell Master MT8212B, Руководство пользователя, Страница: 261 / 294

EVDO Over The Air Measurements
To make EVDO over the air measurements:
Step 1.
On the Cell Master, press the MODE key, use the Up/Down arrow key to select
the
EVDO
mode and press ENTER .
Step 2. Select the
Signal Standard
soft key and press the
Select Standard
soft key. Use
the soft keys or the Up/Down arrow key to highlight the appropriate standard,
such as CDMA US PCS, and press ENTER .
Step 3. Press the
Select Channel
soft key and use the Up/Down arrow key or the nu-
meric keypad to enter the appropriate channel, such as 50, and press ENTER .
Activating the GPS Feature
To activate the GPS feature:
Step 1. Install the Anritsu GPS antenna to the GPS antenna connection on the Cell Mas-
ter connector panel.
NOTE: The GPS antenna connection on the Cell Master is fitted with a reverse
BNC connector to help prevent damage to the GPS circuitry. There is a DC
voltage present on this connector. Do not connect anything other than the
Anritsu GPS antenna to this port.
Step 2. Press the SYS key.
Step 3. Select the
GPS
soft key.
Step 4. Press the
GPS On/Off
soft key to turn the GPS feature on or off. When GPS is
first turned on, the GPS icon below will be displayed in red:
Step 5. When the GPS receiver has tracked at least three satellites, the GPS icon will
change to:
Step 6. Press the
Location
soft key to view the latitude, longitude and altitude informa-
tion and UTC timing.
Step 7. Press the
Quality
soft key to display the number of tracked satellites and the GPS
quality. When at least three satellites are being tracked, the GPS icon will
change.
NOTE: Press the
Reset
soft key when activating the GPS for the first time.
Step 8. Press the MEAS/DISP key and select the
Setup
soft key.
Step 9. Select
PN Search
and press the
GPS Auto
soft key.
Chapter 18 EVDO Mode
18-11
GPS
GPS