Anrtisu Cell Master MT8212B, Руководство пользователя, Страница: 133 / 294

Chapter 3
Getting Started
Introduction
This chapter provides a brief overview of the Anritsu Cell Master. The intent of this chapter
is to provide the user with a starting point for making basic cable and antenna analyzer,
spectrum analyzer, and power meter measurements. Procedures that are specific to cable
and antenna analyzer mode (page 3-2), Spectrum Analyzer mode (page 3-10), and common
to all modes (page 3-14) are presented.
Power On Procedure
The Anritsu Cell Master is capable of up to 1.5 hours of continuous operation from a fully
charged, field-replaceable battery. Built-in energy conservation features allow battery life to
be extended.
The Cell Master can also be operated from a 12Vdc source (which will also simultaneously
charge the battery). This can be achieved with either the Anritsu AC-DC Adapter (P/N
40-168) or 12Vdc Automotive Cigarette Lighter Adapter (P/N 806-141). Both items are in-
cluded as standard accessories (see Chapter 1).
To power on the Cell Master:
Step 1. Press the ON/OFF front panel key (Figure 3-1).
Step 2. The Cell Master will display the model number, the firmware revision, the inter-
nal temperature and voltage, and then perform a five second self test. At com-
pletion of the self-test, the screen displays a prompt to press ENTER to
continue. If enter is not pressed, the Cell Master will continue after a five second
timeout.
Step 3. Press ENTER to continue.
The Cell Master is now ready for operation.
3-1
ON/OFF
KEY
HOLD
RUN
START
CAL
AUTO
SCALE
SAVE
SETUP
RECALL
SETUP
LIMIT MARKER
SAVE
DISPLAY
RECALL
DISPLAY
PRINT
MODE FREQ/DIST AMPLITUDE MEAS/DISP
SYS
ENTER
CLEAR
ESCAPE
ON
OFF
/
1 2
4
5 6
7 8
9 0
3
+
-
.
MT8212B
Cell Master
Figure 3-1. Cell Master On/Off Key