Anritsu MT9812B, Руководство по эксплуатации, Страница: 87 / 144

5-19
Remote Control
5
SENSe<n>:POWer:INTerval
Function
Sets the measuring interval.
Program message
SENSe<n>:POWer:INTerval < time >
SENSe<n>:POWer:INTerval?
Response message
SENSE<n>:POWER:INTERVAL < time >
Parameter
< time >
:= {f|0:001
≤
f
≤
359999}
Explanation
This command sets the measuring interval.
The interval can be set as 0.001 s (1 ms), 0.01 s (10 ms), 0.02 s (20 ms), 0.05 s (50
ms), 0.1 s (100 ms), 0.2 s (200 ms), 0.5 s (500 ms), or a value between 1 s and
359,999 s with 1 s resolution.
The <time> is set in units of seconds and rounded off by the resolution.
POINT
The MT9812B does not support the data read-out func-
tion for a measuring interval of 100 ms or shorter. So,
the measuring interval between 1 ms and 50 ms for the
optical sensor unit can be set, but the measured value
may not be read-out, correctly. When using the optical
sensor unit in the MT9812B, set the measuring interval
to 100 ms or longer.
SENSe<n>:MEMory:COPY[:NAME]
Function
Initializes the measuring condition of optical sensor unit.
Program message
SENSe<n>:MEMory:COPY[:NAME] 0, MC
Explanation
This command returns the measuring condition of the optical sensor unit to the
status at the shipment.
POINT
The MT9812B is not provided with the measuring-con-
dition saving function, but units are initialized by the
same message (reading out the contents in memory
“0”) as that used in the Optical Test Set MT9810A.
5.3 Device Message