Anritsu MT9812B, Руководство по эксплуатации, Страница: 33 / 144

2-5
Specifications
2
Specifications of Units (FP-LD light sources)
Light emitting device
Center frequency*
1
Spectrum half-amplitude level* 1
Conforming fiber
Connector
Output power*
1
Laser product safety standards
Magnitude of attenuation of optical output
Inter-modulation function
Time stability (short time)* 1, * 2, * 3
Time stability (long time)* 1, * 2, * 4
Temperature stability*
1,
*
2,
*
5
Warming up time
Environmental conditions
Dimensions and weight
Model name MU951301A MU951501A MU951001A
FP-LD
1310
±
20 nm 1550
±
20 nm 1310
±
20 nm/1550
±
20 nm
≤
5 nm or less
≤
10 nm or less
≤
5 nm or less/
≤
10 nm or less
SM fiber (ITU-T.G. 652)
Compatible with FC-PC, ST, DIN, HMS-10/A and SC
∗
6
+7
±
1 dBm
IEC60825-1: Class 1M, 21CFR1040: Class IIIb
0.00 to 6.00 dB, 0.01 dB step
270/1 k/2 kHz, extinction ratio 13 dB (Min.)
±
0.002 dB
±
0.005 dB
±
0.02 dB
±
0.05 dB
±
0.1 dB
±
0.15 dB
One hour after the optical output is turned ON
Operating temperature: 0 to 50
°
C, humidity of not greater
than 90 % (must be condensation free)
Storage temperature:
−
40 to 71
°
C, humidity of not greater
than 95 % (must be condensation free)
78(H)
×
41(W)
×
335(D) mm, 700 g (Max.)
NOTE: All the values for the wavelength are values registered in a vacuum
state.
Only one MU951001A can be installed.
*1: At the time of CW light, magnitude of optical attenuation set at 0.00 dB and
the center frequency of fp. At the time of using the SM fiber (ITU-T.G. 652)
and FC-PC connector.
*2: When the reflection loss viewed from the light source is 40 dB or greater.
*3: Temperature kept constant for 15 minutes between 20 and 30
°
C.
*4: Temperature kept constant for six hours.
*5: Temperature kept constant for eight hours between 0 and 50
°
C.
*6: A connector specified from among optical connector options is attached as a
standard feature. When no specifications are given, the FC-PC connector
2.2 Specifications