Anritsu MT9812B, Руководство по эксплуатации, Страница: 128 / 144

Section 7 Maintenance and Re-transportation
7-4
(4) Finish by pressing the tip of a new adapter cleaner without any alcohol on it
to the ferrule end-face and wipe in one direction 2 or 3 times.
(5) Clean the adapter interior with adapter cleaner.
(Refer to “Cleaning optical adapter” below.)
(6) Attach the adapter using the steps in reverse order. Be careful not to scratch
the ferrule end-face.
Cleaning optical adapter
Use adapter cleaner supplies for this unit to clean the optical adapter for connec-
tion to the fiber-optic cable. An example of the FC adapter is described below.
Follow similar methods and steps for cleaning other adapters. In addition, clean
the adapter which was removed to clean the built-in ferrule end-face using the
following steps.
Insert the adapter cleaner to the split sleeve interior of the adapter then move it
back and forth while rotating it in one direction.
Note:
Check the ferrule radius. Use only a f1.25 mm or f2.5 mm dedicated
adapter cleaner.