Anritsu MT9812B, Руководство по эксплуатации, Страница: 78 / 144

Section 5 Remote Control
5-10
SOURce<n>:POWer:WAVelength:UNIT
Function
Sets the display unit of wavelength.
Program message
SOURce<n>:POWer:WAVelength:UNIT < unit >
SOURce<n>:POWer:WAVelength:UNIT?
Response message
< unit >
Parameter
< unit >
:= {M, HZ}
Explanation
This command switches the display unit of wavelength.
SOURce<n>:MEMory:COPY[:NAME]
Function
Initializes the measuring condition of light source unit.
Program message
SOURce<n>:MEMory:COPY[:NAME] 0, MC
Explanation
This command returns the measuring condition of the light source unit to the
status at the shipment.
POINT
The MT9812B is not provided with the measuring-con-
dition saving function, but units are initialized by the
same message (reading out the contents in memory
“0”) as that used in the Optical Test Set MT9810A.