Anritsu MT9812B, Руководство по эксплуатации, Страница: 58 / 144

Section 4 Operation
4-6
CAUTION
The analog signal output connector is exclusively for
output. When signals are input by mistake, this may
cause damage to the Device or the signal source con-
nected.
Do not pull the cord while the cord remains inserted to
the analog signal output connector. This may cause
damage to the connector or the internal circuit.
POINT
Analog signals are directly output without correction of
the wavelength sensitivity of the signals from the light
intercepting circuit of the optical sensor. For this rea-
son, the relationship between the level indication and
the voltage output merely serves as a guideline and
they do not necessary match each other. However, this
function will prove useful to observe changes that take
place more quickly than the display of numerical val-
ues on the main unit is able to indicate.
4 Drawing lever Incorporates a locking mechanism to be used when units are mounted on the main
unit. Pinch the lever and draw it out to remove the lever.
3.3 Mounting and Removal of Plug-in Unit
5 Cap A cap for optical connector protection and shading from light.