Anritsu MS8608A, Руководство по эксплуатации, Страница: 93 / 338

Section 5 Setting Functions
5-17
Selecting interface to be used (Connect To Controller)
Step Procedure
1 Move the cursor to “Connect To Controller” using the Entry keys or the rotary
knob.
2 Press the Set Entry key.
3 The selection window opens.
4
Move the cursor to the preferred interface using the keys or the rotary knob.
5
Press the Set key.
After the setting is completed, the set interface appears in the square brackets [ ] in the
“Connect To Controller” field.
The set items are as follows:
• GPIB: Enables the use of the GPIB interface
• RS-232C: Enables the use of the RS-232C interface
• ETHERNET: Enables the use of the ETHERNET interface when Option 09 is
installed.
Setting GPIB Address (My Address)
Step Procedure
1 Move the cursor to “My Address” using the Entry keys or the rotary knob.
2
Press the Set Entry key.
3
The setting window opens.
4 Set the desired address using the keys or the rotary knob.
5 Press the Set key.
After the setting is completed, the set address appears in the square brackets [ ] in the
“Connect To Controller” field.
GPIB address range is from 0 to 30.
However, the “My Address” setting is ignored when the GPIB is not set for “Connect
To Controller.”