Anritsu MS8608A, Руководство по эксплуатации, Страница: 31 / 338

Section 1 General
1-9
Color TFT-LCD, Size: VGA 17 cm (6.5" Type),
Number of colors: 4096 (RGB, 16-scale settable)
Brightness: 5-scale settable (include OFF)
Display data can be hard-copied via the parallel interface
(model corresponded to PCL Level 3 or less, or to ESC/P-J83 or -J84)
PC-ATA card or Compact Flash card (3.3 V/5 V) can be accessed
Function: Save/recall measurement settings and waveform data
Save bitmap files of waveform display
Connector: JEIDA Ver 4/4.1 PCMCIA Re12.0, 1 slot
Can be controlled as device from external controller (excluding power switch)
Baud rate: 1200, 2400, 4800, 9600, 19.2 k, 38.4 k, 56 k, 115 kbps
Connector: D-Sub 9 pins, jack
Meets to IEEE488.2
Can be controlled as device from external controller (excluding power switch)
SH1, AH1, T6, L4, SR1, RL1, PP0, DC1, DT1, C0, E2
Based on centoronics, output printing data to printer
Connector: D-Sub 25 pins, plug
BNC connector
Frequency: 10.69 MHz/66 MHz
Output level: –10 dBm typ. (frequency 50 MHz, at upper edge of display scale, 50
Ω
termination)
BNC connector, 50
Ω
nominal value
Frequency: 60.69 MHz/66 MHz
Gain: 0 dB typ. (frequency 50 MHz, input attenuator 0 dB)
BNC connector
Output level: 0 to 0.5 V
±
0.1 V (log scale)
0 to 0.4 V
±
0.1 V (linear scale)
(Frequency 50 MHz, at display scale range of upper-end to lower-end in
10 dB/div and 10%/div, 75
Ω
termination)
Analog RGB
Connector: D-Sub15pins, jack
BNC connector
Frequency: 10 MHz
±
10 Hz, 13 MHz
±
13 Hz
Level:
≥
0 dBm (50
Ω
termination)
BNC connector
Frequency: 10 MHz
Output level p-p:2 to 5 V (200
Ω
termination)
BNC connector
Output level: 0 to 10 V
±
1 V
(100 k
Ω
termination, from left edge to right edge in display scale, single band
sweep)
BNC connector
Output level: TTL (when sweeping, at low level)
4-pin connector, +12 V, –12 V, each
±
10%, each max 110 mA
BNC connector
Input level:
±
10 V (0.1 V resolution), or TTL level
177 mm (H), 320 mm (W), 411 mm (D)
(exclude handle, legs, front cover, fan cover)
≤
16 kg (MS8608A),
≤
16.5 kg (MS8609A) Nominal values
85 to 132 V, 170 to 250V (wide range ac voltage), 47.5 to 63 Hz,
≤
400 VA
Operating
0 to 50
°
C,
≤
RH85%
Preservation
–20 to +60
°
C
General specification
Display
Hard copy
PC Card
interface
RS-232C
GPIB
Parallel interface
IF Output
Wideband IF Output
Video Output (Y)
Video Output
External reference
signal input
Buffered Output
Sweep Output (X)
Sweep Status
Output (Z)
Probe source
Trig/Gate input
Dimension
Mass
Power (operating range)
Temperature range
Function
Interface
Item Specifications
General specification
Others
*1: Typical value and nominal value are reference data, so that not warrant them as spec.