Anritsu MS8608A, Руководство по эксплуатации, Страница: 242 / 338

SECTION 4 STATUS STRUCTURE
4-10
Reading, writing, and clearing the Standard Event Status Register
Reading
The register is read using the
∗
ESR? command query.
The register is cleared after being read. The response message is integer-format data
with the binary weight added to the event bit and the sum converted to decimal.
Writing
With the exception of clearing, data cannot be written to the register from outside.
Clearing
The register is cleared when:
[1] A
∗
CLS
command is received
[2] The power is turned on Bit 7 is set to ON, and the other bits are cleared to 0
[3] An event is read for the
∗
ESR?
query command
Reading, writing, and clearing the Standard Event Status Enable Register
Reading
The registers is read using the
∗
ESE? command.
The response message is integer-format data with the binary weight added to the event
bit and the sum converted to decimal.
Writing The register is written using the
∗
ESE common command.
Clearing
The register is cleared when:
[1] An
∗
ESE command with a data value of 0 is received
[2] The power is turned on
The Standard Event Enable Register is not affected when:
[1] The device clear function status of IEEE488.1 is changed
[2] An
∗
RST common command is received
[3] A
∗
CLS
common command is received