Anritsu MS8608A, Руководство по эксплуатации, Страница: 88 / 338

Section 5 Setting Functions
5-12
Setting Initial State (Initial)
Set the initial state immediately after power-on, as follows:
Step Procedure
1 Move the cursor to “Initial” using the Entry keys or the rotary knob.
2 Press the Set Entry key.
3
The selection window opens.
4
Move the cursor to “Before Power Off” or “Fixed State” using the keys or the
rotary knob.
5
Press the Set key.
After the setting is completed, the set “Before Power Off” or “Fixed State” appears in
the square brackets [ ] in the “Initial” field.
• Before Power Off: Starts up in the status immediately before the previous power-
off. Initialization is not performed.
• Fixed State: Initialized at power-on. (However, the parameters in Config
screen are not initialized.)
Setting Copy Destination (Copy to )
Set the copy destination, as follows:
Step Procedure
1
Move the cursor to “Copy to” using the Entry keys or the rotary knob.
2 Press the Set Entry key.
3 The selection window opens.
4
Move the cursor to “Printer” or “BMP file to Mem Card” using the keys or the
rotary knob.
5 Press the Set key.