Anritsu MS8608A, Руководство по эксплуатации, Страница: 84 / 338

Section 5 Setting Functions
5-8
Adjusting LCD Brightness (LCD BRIGHTNESS)
Adjust the brightness of the LCD display, as follows:
Step Procedure
1 Move the cursor to “LCD Brightness” using the Entry keys or the rotary knob.
2 Press the Set Entry key.
3
The selection window opens.
4
Set the brightness value using the rotary knob.
5 Press the Set key.
After the setting is completed, the set value appears in the square brackets [ ] in the
“LCD Brightness” field. When using an external controller, this item can be set to Off.
However, it cannot be set to Off by the panel operation.
Setting Alarm Sound On/Off (Buzzer)
Set the buzzer (that sounds when an invalid value is set) on or off, as follows:
Step Procedure
1
Move the cursor to “Buzzer” using the Entry keys or the rotary knob.
2 Press the Set Entry key.
3 The selection window opens.
4
Move the cursor to “On” or “Off” using the keys or the rotary knob.
5
Press the [Set] key.
After the setting is completed, the set “On” or “Off” is displayed in the square brackets
[ ] in the “Buzzer” field. The buzzer sounds as an alarm when “On” is set.