Anritsu MS8608A, Руководство по эксплуатации, Страница: 62 / 338

Section 3 Panel Description
3-4
No. Panel Marking Explanation of Function
10
Recall This executes recall/save.
[Recall] Reads measurement parameters and waveform data
from internal memory or memory card.
[Save] Saves measurement parameters and waveform data to
internal memory or memory card.
11
Measure This menu is for performing the various application measurements
including frequency measurement, noise measurement, adjacent-channel
leakage power measurement, etc.
12 Hi Power This sets the RF input connectors. The MS8609A have not this key.
[High Power] Enables the High Power input connector.
[Low Power] Enables the Low Power input connector.
13 Display This section is for selecting the trace waveform. Normally, in the
frequency domain, up to two trace waveforms can be displayed.
The zero-span (Time Domain) mode is selected simply by pressing the
[Time] key.
[A, B] Displays trace A or B waveform in frequency domain.
[A/B, A/BG] Displays trace A and B waveforms simultaneously, or
displays trace A and BG (background frequency
spectrum including trace A) simultaneously.
[Time] Switches to zero span (Time domain) mode to display
time domain waveforms.
[A/Time] Displays trace A and the time domain waveform
simultaneously.
14 Trig/Gate This sets the trigger/gate functions.
[Trig/Gate] Sets the sweep-start trigger and gate (to control
waveform-data write timing) functions.
15
Coupled Function This sets the RBW, VBW, sweep time and input attenuator.
16
Entry These keys set the numeric data, units and special functions.
[Rotary knob] Used for moving marker and inputting data.
[
∨
, ] Increments and decrements input data.
[Shift] To execute panel functions indicated by blue letters,
press this key and then press the blue-lettered key.
[BS] Backspace key for correcting input mistakes.
[0-9, . , +/–] Numeric-data setting keys.
[GHz, MHz, kHz, Hz]
Units keys for frequency, level, time, etc.
[set] Key for setting parameters.
[Cancel] This cancels the entry which is able to set with [set] key.
∨