Anritsu MS8608A, Руководство по эксплуатации, Страница: 64 / 338

Section 3 Panel Description
3-6
No. Panel Marking Explanation of Function
53
Wideband IF OUT This is the wideband IF output connector. This signal is not bandwidth
controlled by the RBW setting.
54 Sweep (X) This is an output connector for sweep signal (X).
55
Video (Y) This connector, outputs a Y-axis signal that is proportional to the video
detection signal output, is band-limited according to the RBW set value,
and is logarithmically compressed at log scale.
56 Sweep Status (Z) This is an output connector for sweep status signal (Z).
57 Trig/Gate In (
±
10 V)
This is an input connector for external trigger/gate signal.
58 O/I This is the AC line power switch.
59 (Inlet) This is the fused AC power inlet to which the supplied power cord is
connected. It contains a time-lag fuse.
60
Functional earth terminal
This is the terminal that is electrically connected to the chassis of the
equipment.
61 Parallel This is the Parallel connector. Connect it to a printer.
62 VGA Out This is the VGA signal output connector.
63
GPIB This connector is for use with a GPIB interface.
It is connected to an external system controller.
64 RS-232C This is the RS-232C connector. Connect it to an external system control-
ler.
65 Ethernet This is the 10 Base-T connector for Ethernet. Connect this to the external
system controller.
66
Name plate This shows a production number and options.
67 OPT05 Out This is an output connector for Option 05 Rubidium reference oscillator
(10 MHz).
Connect this connector to the 10 MHz/13 MHz Ref In connector using
the J1066 coaxial cord of an accessory for Option 05.