Anritsu 37 D Series, Руководство по обслуживанию, Страница: 68 / 190

From your Windows-based PC, run the program (3700Test.exe). The
program’s interface will appear similar to the display below:
Connect the GPIB cable between the PC and the upper GPIB connec-
tor of the VNA rear panel (labeled IEEE 488.2 GPIB). Turn on the
VNA and verify the instrument address is 6 (found under the Utility
Menu Key |GPIB ADDRESSES).
The Program will locate the VNA, and query the operator regarding
his/her name, customer name, and Test Port type.
The program will create a file for Pass/Fail information named
“123456.SVC” (where 123456 is the serial number of the VNA). If the
program locates an existing .SVC file of the same instrument in the
37000 folder, the operator must decide whether to continue storing
data to the existing .SVC test record or start a new .SVC record.
Labels of incomplete tests have a yellow background. A green back-
ground indicates that the test passed; a red background indicates that
the test failed. (Some versions of the program do not use red to indi-
cate failed tests.)
PERFORMANCE TESTS OPERATIONAL TESTS
4-8 37XXXD MM
Figure 4-1.
2300-178 Software Interface