Anritsu 37 D Series, Руководство по обслуживанию, Страница: 163 / 190

D-6
PERFORMANCE AND
OPERATIONAL TESTS
This chapter describes a series of manually performed tests that will
ensure that the system meets many factory specifications. Many of
these tests are also duplicated in the 2300-178 software package (ver-
sion 5.00 and above).
All technical specifications (guaranteed and typical) are found in the
ME7808B/C Technical Data Sheet, part numbers 11410-00330 and
11410-00410, found in Appendix C.
Two automated methods are also available for S-parameter measure-
ment accuracy testing (Performance Verification). The test port type
being utilized will determine which method is appropriate.
NOTE
Anritsu does not support tests or verification processes for
wafer probe equipment. Contact the vendor of the wafer
probe equipment if such support is desired.
For systems using the W1 coaxial test ports (Multiplexing Couplers of
all models), performance verification of the system is accomplished by
use of the Anritsu Model 3656 calibration/verification kit and the
2300-496 software (packaged with the kit). This series of automated
tests will verify that the system S-parameter measurement accuracy
meets factory specifications. Instructions are packaged within the
software as an Adobe Acrobat file.
For systems using only WR10 waveguide test ports, NIST traceable
verification of S-parameter measurement accuracy may be performed
for the system (including a WR10 calibration kit). Contact Anritsu
Customer Service in Morgan Hill, California for information about this
service.
The balance of this section is dedicated to operational performance
tests of the complete ME7808B/C system.
APPENDIX D PERFORMANCE AND OPERATIONAL TESTS
37XXXD MM D-7