Ankom ANKOM200 FIBER ANALYZER, Руководство оператора

Страница: 34 / 38

Operator’s Manual
pg. 34
Rev 1/24/20
Check the Bag Suspender
T
he Bag Suspender should be checked every three to six months or if fiber values are higher than normal or inconsistent.
To check the Bag Suspender, follow the procedure detailed below.
1. Verify that you are using the NEW version of the
Bag Suspender Trays.
The NEW version of the trays has 9 holes in groups
of 3 as shown in the picture to the right.
NEW OLD
IMPORTANT:
You CANNOT use the new and old bag suspender trays together.
2. Check the trays for melting.
The pictures shown are examples of extreme cases.
However, for proper operation you must replace trays
that show signs of melting or wear.
3. Check that the bottom tray is flat.
If the bottom tray is concave (see picture) the bag
suspender will catch in the vessel and melt.
Storage
Acid residue can corrode the instrument if left on or in the instrument. Before storing the instrument (or leaving the instrument
unused) for greater than one month, rinse the Vessel thoroughly with water using the following procedure.
1. Fill the Vessel with water
.
2. Press the
AGITATE
button so that it is lit.
3. After 10 minutes, press the
AGITATE
button so that it is NOT lit. This will turn the agitation off.
4. Open the Exhaust Valve and exhaust the hot water.
5. After the water has been exhausted, close the Exhaust Valve.
Melted trays