Anita Garudan GZ-539 Series Скачать руководство пользователя страница 95

Страница: 95 / 155

[Note] The Enter can only be used in single selection status

）

Create the Customized Reverse Sewing Pattern

：

Referring to the contents in above sector, user can press

to enter the interface for creating

the customized reverse sewing pattern.

、

The number display area (A) will

display the empty number for saving;

user can use the keyboard (B) to input

the number wanted as well.

、

After confirming the number, user

can press

to finish the

operation and return or press

to cancel the operation and return.

[Note] Can not use the existing number.

）

Edit the Customized Reverse Sewing Pattern

：

After creation of the customized reverse sewing, the system will enter the edition interface; or user

can press

in reverse sewing setting interface to enter the edition interface.

For the operation methods, please refer to

[3.7.4 Edit the Customized Pattern]. The max

permitted stitch number for the customized

sewing is 64 stitches

3.12.4 Comparison of Reverse Sewing Patterns

Standard Reverse Sewing

2-points Contraction Sewing

Customized Reverse Sewing

Front Reverse Back Reverse Front Reverse Back Reverse Front Reverse Back Reverse

www.garudan.cz

Содержание Garudan GZ-539 Series




























































































































































Результаты поиска

Содержание Garudan GZ-539 Series

Отзывы:

Anita Garudan GZ-539 Series, Руководство пользователя, Страница: 95 / 155

Результаты поиска

Содержание Garudan GZ-539 Series

Отзывы: